LG Philips LM150X08 LM150X08-TL01 LM150X08 LM150X08 TL-B1 LM150X08-TLA1 LM150X08(TL)(B1)  LM150X08(A4)(K3) 

1. General Description

LM150X08 is a Color Active Matrix Liquid Crystal Display with an integral Cold Cathode Fluorescent

Lamp(CCFL) backlight system. The matrix employs a-Si Thin Film Transistor as the active element.

It is a transmissive type display operating in the normally white mode. It has a 15.0 inch diagonally measured 

active display area with XGA resolution (768 vertical by 1024 horizontal pixel array).

Each pixel is divided into Red, Green and Blue sub-pixels or dots which are arranged in vertical stripes.

Gray scale or the brightness of the sub-pixel color is determined with a 8-bit gray scale signal for each dot,

thus, presenting a palette of more than 16M colors.

It has been designed to apply the 8-bit 1 port LVDS interface.

It is intended to support applications where high brightness, super wide viewing angle, high color

saturation, and high color are important.

General Features

CN1

(20pin)

RGB,DLK,DE

Hsync,Vsync

(LVDS 1Port)

VLCD+3.3V

Power Circuit 

Block

Source Driver Circuit

TFT - LCD Panel

(1024 Y RGB Y 768 pixels)

1

1 1024

768

Back light Assembly (2CCFL)

CN2 (3pin)

RGB

Timing Controller

(LVDS Rx integrated)

CN3 (3pin)

Viewing Angle (CR>10) R/L 130(Typ.), U/D 100(Typ)

Color Depth 16M colors ( 6-bit with FRC )

Pixel Format 1024 horiz. By 768 vert. Pixels RGB strip arrangement

250 cd/m2 Luminance, White (Center 1 points Typ.)

Power Consumption Total 10.41 Watt(Typ.) (1.45Watt@VLCD, 8.96 Watt@250cd/[Lamp=8mA])

Weight 1,000 g (Typ.)

Display Operating Mode Transmissive mode, normally white

Surface Treatment Hard coating(3H) & Anti-glare (Haze 13%) treatment of the front polarizer