Vacuum drying oven is widely used in research and application fields such as biochemistry, chemical pharmaceuticals, medical and health care, agricultural research, environmental protection, electronic components, plastic products, and other related specifications for the development and quality management of various industrial components. The product is subjected to (high altitude) simulation tests, and all tested samples are tested under a negative pressure of 11.6 kPa (1.68 psi)
2. Test purpose: The final result of the test requires that the product cannot explode or catch fire.
3. Standard: UL 1642, UL2054, UN38.3 and other test standards;
The box is made of high-quality cold-rolled steel plate, with electrostatic powder spraying on the surface. The coating is hard and firm, with strong rust prevention ability, and is not corroded.
The inner box is made of high-quality stainless steel plate, up to 6mm thick, with rounded corners that are smooth, smooth, and easy to clean.
The box door is of a double layer tempered glass structure, which can clearly observe the test items in the box;
A rubber sealing ring is installed between the working room and the glass door to ensure a high vacuum degree in the box.
Model: HMPWCV27T2 | HMPWCV64T2 | HMPWCV125T2 | HMPWCV216T2
Inner box size
(W * D * H) cm 30 × 30 × 30 | 40 × 40 × 40 | 50 × 50 × 50 | 60 × 60 × 60
RT+10 ℃~200 ℃, freely set temperature value
Adopt the heat radiation method of two-sided heating, and high temperature resistant heating pipe
Temperature control system
Adopt PID microcomputer automatic temperature control system
Three-digit display 0. S~999H (H hours, M minutes, S seconds can be switched)
11.6Pa (indicated value of vacuum meter ＜ -0.116Mpa)
Inner box material
SUS 304 # stainless steel (thickness: 6.0mm)
Inner box material
SECC steel plate, refined powder baking paint treatment (thickness 1.5mm)
Toughened glass with explosion-proof film
Equipped with universal wheels
One vacuum pump with two layers of fixed support
AC 220V 50HZ